Skip to content
Flake Finish

About 15 minutes from our shop in Erie

Garage floor coating in Broomfield, Colorado

Broomfield covers a lot of ground, from the older neighborhoods off 120th to Anthem and McKay Landing up north. Three-car garages are common in the newer areas, and that's where a full-flake floor makes the biggest visual difference. Broomfield is about fifteen minutes from our shop.

Free Broomfield quote See pricing

Garages in Broomfield

What Broomfield slabs need, and what we do about it

North Broomfield is where most of the newer garages are. Anthem, Wildgrass, McKay Landing and the Broadlands were built from the early 2000s through the 2010s, and they are full of three-car garages on slabs that are still in good structural shape. The prep issue on those floors is almost always a builder-applied sealer, which has to be ground off before a coating will bond, and the occasional peeling DIY epoxy kit that someone applied over it.

South of 120th the housing is older. Broomfield Heights, Northmoor and the streets off Main were built in the 1960s and 1970s, and those slabs have fifty winters on them. Expect pitting, surface scaling and deep oil stains, sometimes with a layer of garage floor paint on top. None of that is a dealbreaker. It just means more grinder time, which we price in up front so the quote is the price.

Peeling epoxy is a common Broomfield problem. A kit from the hardware store, rolled over an acid-etched or unprepped slab, usually starts lifting under the tires within a couple of years. We remove it completely with diamond grinding, then rebuild the floor with a polyurea base coat and a UV-stable polyaspartic top so it does not happen again.

Searching for epoxy garage floors in Broomfield? We install polyaspartic instead. It is UV-stable, cures in cold weather, and does not soften under hot tires, which is why we don't install epoxy in Colorado garages. See the side-by-side comparison.

The process

Five steps on every Broomfield floor

Grind, test and repair, base coat, full flake, polyaspartic topcoat. Installed by the owner, usually in one day.

  1. Grind

    Diamond grinding opens the concrete so the coating can bite. No acid etch, ever.

  2. Test & repair

    Moisture test on every slab. Cracks routed and filled with flexible polyurea.

  3. Base coat

    Pigmented polyurea base coat, rolled and back-rolled for full coverage.

  4. Full flake

    Vinyl flake broadcast to refusal, so the floor is 100% covered, not sprinkled.

  5. Topcoat

    Clear polyaspartic topcoat. UV stable, hot-tire proof, and cures in cold weather.

Full process and what's included

Pricing in Broomfield

Typical ranges, installed

Same pricing everywhere in our primary service area. No travel charge for Broomfield. What moves a floor within the range.

1-car garage

≈ 200–300 sq ft

$1,800–2,600

Typical range · installed

Get my quote
Most common

2-car garage

≈ 400–500 sq ft

$2,800–4,200

Typical range · installed

Get my quote

3-car garage

≈ 600–750 sq ft

$4,000–5,800

Typical range · installed

Get my quote

Basements, patios, shops & commercial

Any size

Quote

Priced per sq ft

Get my quote

These are typical ranges for floors in average condition. Every job is quoted in person after a moisture test and a look at the slab. Your written quote is the price — no surprises on install day.

FAQ

Questions from Broomfield homeowners

More answers on the full FAQ.

I put an epoxy kit on my Anthem garage floor and it is peeling. Do you have to remove all of it?
Yes, all of it. Any coating we put over old epoxy is only as strong as the old epoxy's grip on the slab, and if it is peeling in one spot it is letting go everywhere. Full removal by diamond grinding is priced as a line item on your quote, and it is the reason the new floor will still be there in fifteen years.
Does the Anthem HOA need to approve a garage floor coating?
Interior garage floors are not visible from the street and are not normally reviewed by architectural committees. Broomfield's HOAs each have their own rules, so we suggest a quick look at your covenants.
What does a three-car garage in Broomfield typically cost?
Most three-car garages land between $4,000 and $5,800 installed. A clean slab with a builder sealer sits at the low end. A floor with peeling epoxy to remove, wide cracks or a high moisture reading lands higher. Every job is quoted in person after a moisture test, and the quote is the price.
Do you really test for moisture on every slab?
Yes, every one. Colorado slabs, especially newer pours and anything below grade, can push enough water vapor to lift a coating from underneath. A moisture test takes us a few minutes and tells us whether you need a moisture-mitigating primer. We'd rather find out before we coat than have you find out after.
Is it really done in one day?
For most 1-, 2- and 3-car garages, yes. We arrive in the morning, grind and repair, apply base coat and flake, scrape, and topcoat, and we're usually gone by late afternoon. Heavy coating removal or a large shop floor can push to a second day, and we'll tell you that at the quote.

Nearby

Also serving around Broomfield

All 12 cities we serve · Also Brighton, Arvada, north Denver metro, Loveland by request.

Free in-person quote

Ready for a floor you never think about again?

Send a quote request for a free in-person quote. The owner comes out, tests the slab, and gives you a written price on the spot.

Get a free quote